Ableton Live - 5.0 Manual de instrucciones Pagina 262

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 374
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 261
18.15. PING PONG DELAY 260
The delay is preceded by a low- and high-pass lter that can be controlled with an XY
controller. To dene the lter bandwidth, click and drag on the vertical axis. To set the
position of the frequency band, click and drag on the horizontal axis.
To refer delay time to the master tempo, activate the Sync switch, which allows using the
Delay Time beat division chooser. The numbered switches represent time delay in 16th
notes. For example, selecting 4 delays the signal by four 16th notes, which equals one
beat (a quarter note) of delay. This delay time represents the time it takes for the input
signal to appear at the left channel. The delay time between the input and the right channel
is twice as long.
If the Sync switch is off, the delay time reverts to milliseconds. In this case, to edit the delay
time, click and drag up or down in the time eld, or click in the eld and type in a value.
The Feedback parameter controls how much of the right channel output signal returns to
the delay line input. The feedback loop also includes a lter that can color the feedback
sound, thus producing different timbres with successive echoes.
The Dry/Wet control adjusts the balance between the processed and dry signals. Set it to
full wet if using the Ping Pong Delay in a return channel.
Vista de pagina 261
1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 373 374

Comentarios a estos manuales

Sin comentarios