Ableton Live Intro Manual de instrucciones Pagina 262

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 410
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 261
CHAPTER 20. LIVE AUDIO EFFECT REFERENCE 260
controls are set to 0.00 dB. This is typical behavior for this kind of lter, and is part of EQ
Three's unique sound. If you need a more linear behavior choose 24 dB Mode or use the
EQ Eight.
20.9 Erosion
The Erosion Effect.
The Erosion effect degrades the input signal by modulating a short delay with ltered noise
or a sine wave. This adds noisy artifacts or aliasing/downsampling-like distortions that sound
very digital.
To change the sine wave frequency or noise band center frequency, click and drag along
the X-axis in the X-Y eld. The Y-axis controls the modulation amount. If you hold down the
Alt
(PC) /
Alt
(Mac) modier key while clicking in the X-Y eld, the Y-axis controls
the bandwidth. Note that bandwidth is not adjustable when Sine is selected.
The Frequency control determines the color, or quality, of the distortion. If the Mode control
is set to Noise, this works in conjunction with the Width control, which denes the noise
bandwidth. Lower values lead to more selective distortion frequencies, while higher values
affect the entire input signal. Width has no effect in Sine Mode.
Noise and Sine use a single modulation generator. However, Wide Noise has independent
noise generators for the left and right channels, which creates a subtle stereo enhancement.
Vista de pagina 261
1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 409 410

Comentarios a estos manuales

Vikinin 04 Jan 2024 | 12:03:19

urenrjrjkvnm