Ableton Live - 9.0 Manual de usuario Pagina 340

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 611
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 339
340 Live Audio Effect Reference
For the Above thresholds, Attack defines how long it takes to reach maximum compression or
expansion once a signal exceeds the threshold, while Release sets how long it takes for the de-
vice to return to normal operation after the signal falls below the threshold.
For the Below thresholds, Attack defines how long it takes to reach maximum compression or
expansion once a signal drops below the threshold, while Release sets how long it takes for the
device to return to normal operation after the signal goes above the threshold.
With Soft Knee enabled, compression or expansion begins gradually as the threshold is ap-
proached.
The RMS/Peak switch also affects how quickly Multiband Dynamics responds to level changes.
With Peak selected, the device reacts to short peaks within a signal. RMS mode causes it to
be less sensitive to very short peaks and to begin processing only when the incoming level has
crossed the threshold for a slightly longer time.
The global Output knob adjusts the overall output gain of the device.
The Time control scales the durations of all of the Attack and Release controls. This allows you
to maintain the same relative envelope times, but make them all faster or slower by the same
amount.
The Amount knob adjusts the intensity of the compression or expansion applied to all bands. At
0%, each compressor/expander has an effective ratio of 1, meaning that it has no effect on the
signal.
22.22.3 Sidechain Parameters
The Multiband Dynamics Device With Sidechain Section.
Vista de pagina 339
1 2 ... 335 336 337 338 339 340 341 342 343 344 345 ... 610 611

Comentarios a estos manuales

Sin comentarios